Thanks goodness for power screw drivers!
I use elmer's glue to hold the masonite panels on the backing boards.
And a few small wire brads to hold the panels in place while the glue dries.
Below the slats are in place making a simple frame.
Thanks goodness for power screw drivers!
I use elmer's glue to hold the masonite panels on the backing boards.
And a few small wire brads to hold the panels in place while the glue dries.
Below the slats are in place making a simple frame.


My drying racks for my frames are not high tech - coffee cans!
The big problem is where to store the finished pieces? Some are hung in the garage, one has been moved into the permanent collection by my wife and the rest are in the front room next to my studio space.

Would you believe that the Christmas decoration below was my "subject." I had to turn off the flash to allow the shutter to remain open longer while shooting the images above.

I used commercial "texture plates" to impress two cirlcle patterns into the plaster of the painting below.
As you can see, I haven't yet added the third color layer to many of the paintings near the top of the photo below.
The second color layers have been mostly reds and some greens. I have to keep with my method of first layers light, second layers medium and third layers dark.
Since I have cutout and sanded 121 boards, I have a ways to go (70!). The textures are quite low relief - mostly between a 1/16" and 1/8". I'm sure that nowhere have I exceeded a thickness of 1/8".